Effect of nano-fillers on conductivity of polyethylene/low melting point metal alloy composites

A novel method for preparing conductive polyethylene(PE) composites has been developed. In the method, the powder of low melting point metal alloy(LMPA) is filled into the PE matrix by using twin screw extruder at a temperature below the melting point of the LMPA, and followed by a die drawing process at a temperature around the melting point of the metal alloy. It has been found that die drawing process, repeating the die drawing process and adding nano-fillers, such as montmorillonite(MMT) and multi-wall carbon nanotubes(MWCNTs), all help reduce the metal particle size in the PE matrix, thus improve the conductivity of the composite. The conductivity improvement is attributed to an increased number of the smaller metal particles. Therefore, conductive composites of polymer/metal alloy/nano-filler with high conductivity are possible to be prepared by using the new method.     

Asymmetric Total Synthesis of ent‐Pyripyropene A

An asymmetric total synthesis of ent‐pyripyropene A was achieved by a convergent synthetic route. We used our originally developed Ti^III‐catalyzed radical cyclization to construct an AB‐ring portion that consisted of a trans‐decalin skeleton with five contiguous stereogenic centers. The coupling between the AB‐ring and the DE‐ring portions, and a subsequent C‐ring cyclization, led to the total synthesis of ent‐pyripyropene A. An evaluation of the insecticidal activity of ent‐pyripyropene A against two aphid species revealed that ent‐pyripyropene A was 35–175 times less active than naturally occurring pyripyropene A. This result indicated that the biological target of pyripyropene A recognizes the absolute configuration of pyripyropene A.     

Ansa‐Bridged Bis(benzene) Titanium Complexes

Taking advantage of an improved synthesis of [Ti(η⁶‐C₆H₆)₂], we report here the first examples of ansa‐bridged bis(benzene) titanium complexes. Deprotonation of [Ti(η⁶‐C₆H₆)₂] with nBuLi in the presence of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (pmdta) leads to the corresponding 1,1′‐dilithio salt [Ti(η⁶‐C₆H₅Li)₂] ? pmdta that enables the preparation of the first one‐ and two‐atom‐bridged complexes by simple salt metathesis. The ansa complexes were fully characterized (NMR spectroscopy, UV/Vis spectroscopy, elemental analysis, and X‐ray crystallography) and further studied electrochemically and computationally. Moreover, [Ti(η⁶‐C₆H₆)₂] is found to react with the Lewis base 1,3‐dimethylimidazole‐2‐ylidene (IMe) to give the bent sandwich complex [Ti(η⁶‐C₆H₆)₂(IMe)].     

Very Facile Polarity Umpolung and Noncovalent Functionalization of Inorganic Nanoparticles: A Tool Kit for Supramolecular Materials Chemistry

The facile assembly of shell‐by‐shell (SbS)‐coated nanoparticles [TiO₂?PAC₁₆]@shell 1 – 7 (PAC₁₆=hexadecylphosphonic acid), which are soluble in water and can be isolated as stable solids, is reported. In these functional architectures, an umpolung of dispersibility (organic apolar versus water) was accomplished by the noncovalent binding of ligands 1 – 7 to titania nanoparticles [TiO₂?PAC₁₆] containing a first covalent coating with PAC₁₆. Ligands 1 – 7 are amphiphilic and form the outer second shell of [TiO₂?PAC₁₆]@shell 1 – 7 . The tailor‐designed dendritic building blocks 3 – 5 contain negative and positive charges in the same molecule, and ligands 6 and 7 contain a perylenetetracarboxylic acid dimide (PDI) core ( 6 / 7 ) as a photoactive reporter component. In the redox and photoactive system [TiO₂?PAC₁₆]@shell 7 , electronic communication between the inorganic core to the PDI ligands was observed.     

The Critical Effect of Niobium Doping on the Formation of Mesostructured TiO2: Single‐Crystalline Ordered Mesoporous Nb‐TiO2 and Plate‐like Nb‐TiO2 with Ordered Mesoscale Dimples

Highly ordered mesoporous niobium‐doped TiO₂ with a single‐crystalline framework was prepared by using silica colloidal crystals with ca. 30 nm in diameter as templates. The preparation of colloidal crystals composed of uniform silica nanoparticles is a key to obtain highly ordered mesoporous Nb‐doped TiO₂. The XPS measurements of Nb‐doped TiO₂ showed the presence of Nb⁵⁺ and correspondingly Ti³⁺. With the increase in the amount of doped Nb, the crystalline phase of the product was converted from rutile into anatase, and the lattice spacings of both rutile and anatase phases increased. Surprisingly, the increase in the amount of Nb led to the formation of plate‐like TiO₂ with dimpled surfaces on one side, which was directly replicated from the surfaces of the colloidal silica crystals.     

Enhanced Photocatalytic Reduction of CO2 to CO through TiO2 Passivation of InP in Ionic Liquids

A robust and reliable method for improving the photocatalytic performance of InP, which is one of the best known materials for solar photoconversion (i.e., solar cells). In this article, we report substantial improvements (up to 18×) in the photocatalytic yields for CO₂ reduction to CO through the surface passivation of InP with TiO₂ deposited by atomic layer deposition (ALD). Here, the main mechanisms of enhancement are the introduction of catalytically active sites and the formation of a pn‐junction. Photoelectrochemical reactions were carried out in a nonaqueous solution consisting of ionic liquid, 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄), dissolved in acetonitrile, which enables CO₂ reduction with a Faradaic efficiency of 99 % at an underpotential of +0.78 V. While the photocatalytic yield increases with the addition of the TiO₂ layer, a corresponding drop in the photoluminescence intensity indicates the presence of catalytically active sites, which cause an increase in the electron‐hole pair recombination rate. NMR spectra show that the [EMIM]⁺ ions in solution form an intermediate complex with CO₂^?, thus lowering the energy barrier of this reaction.     

Stabilization of Titanium Dioxide Nanoparticles at the Surface of Carbon Nanomaterials Promoted by Microwave Heating

TiO₂ is frequently combined with carbon materials, such as reduced graphene oxide (RGO), to produce composites with improved properties, for example for photocatalytic applications. It is shown that heating conditions significantly affect the interface and photocatalytic properties of TiO₂@C, and that microwave irradiation can be advantageous for the synthesis of carbon‐based materials. Composites of TiO₂ with RGO or amorphous carbon were prepared from reaction of titanium isopropoxide with benzyl alcohol. During the synthesis of the TiO₂ nanoparticles, the carbon is involved in reactions that lead to the covalent attachment of the oxide, the extent of which depends on the carbon characteristics, heating rate, and mechanism. TiO₂ is more efficiently stabilized at the surface of RGO than amorphous carbon. Rapid heating of the reaction mixture results in a stronger coupling between the nanoparticles and carbon, more uniform coatings, and smaller particles with narrower size distributions. The more efficient attachment of the oxide leads to better photocatalytic performance.     

A Designed TiO2/Carbon Nanocomposite as a High‐Efficiency Lithium‐Ion Battery Anode and Photocatalyst

Herein, a peapod‐like TiO₂/carbon nanocomposite has successfully been synthesized by a rational method for the first time. The novel nanostructure exhibits a distinct feature of TiO₂ nanoparticles encapsulated inside and the carbon fiber coating outside. In the synthetic process, H₂Ti₃O₇ nanotubes serve as precursors and templates, and glucose molecules act as the green carbon source. With the alliciency of hydrogen bonding between H₂Ti₃O₇ and glucose, a thin polymer layer is hydrothermally assembled and subsequently converted into carbon fibers through calcinations under an inert atmosphere. Meanwhile, the precursors of H₂Ti₃O₇ nanotubes are transformed into the TiO₂ nanoparticles encapsulated in carbon fibers. The achieved unique nanocomposites can be used as excellent anode materials in lithium‐ion batteries (LIBs) and photocatalytic reagents in the degradation of rhodamine B. Due to the synergistic effect derived from TiO₂ nanoparticles and carbon fibers, the obtained peapod‐like TiO₂/carbon cannot only deliver a high specific capacity of 160 mAh g^?1 over 500 cycles in LIBs, but also perform a much faster photodegradation rate than bare TiO₂ and P25. Furthermore, owing to the low cost, environmental friendliness as well as abundant source, this novel TiO₂/carbon nanocomposite will have a great potential to be extended to other application fields, such as specific catalysis, gas sensing, and photovoltaics.     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。